Floor Grinder Industrial Remote Control

Floor Grinder Industrial Remote Control

Specification

删除表格

Product Description

Customized buttons Industrial Wireless Remote Control

3Choose the +8-position jog mode industrial wireless remote control, the remote control distance is 100 meters, the whole set includes 1 transmitter + 1 receiver, and the receiver uses relay output mode;

Transmitter end layout and function description

1) Layout 4 three-position self-reset levers, jog mode control, each lever is executed when pushed by hand, and automatically returns to the middle zero position when the hand is released, each lever is 3 front, middle and rear The position, the middle is the zero position, each of the front and back positions corresponds to 1 normally open relay output at the receiver end, and the total of 4 levers corresponds to 8 normally open relay outputs at the receiver end;

2) 1 3 function selection rotary switch, the layout of 4 selection positions is: 0 position, 1 position, 2 position, 3 position, 0 position does not correspond to output, 123 selection position corresponds to the receiver terminal 3 normally open relay output ；

3) Layout 1 "lock/unlock" button, which can be used to lock the operation panel buttons to avoid the possibility of malfunction due to accidental triggering or falling to the ground, and when any side of the transceiver is damaged by human factors or other irresistible factors, It can be used at any time by directly pairing with other remote controllers of the same model that are currently in use on site, or adding a transmitter or receiver, and pairing with the original transmitter or receiver can become a set. The "lock/unlock" button is combined with the emergency stop knob to achieve the pairing function.

4) Start+emergency stop knob, the starter does not start the transmitter power supply, and at the same time corresponds to the connection of the main output control circuit of the receiver. At this time, the controlled end device is energized and the emergency stop is photographed, and the main output control circuit can be instantaneously and end. At the same time, all other outputs that are being executed are cut off. 5 seconds after the start button is turned off, the receiver can also emergency stop itself to ensure the safe operation of the equipment;

Emergency stop corresponding to 2 physical contacts is 2 relay outputs, including 1 normally open relay and 1 normally closed relay output. Normally use normally open point and normally closed point as backup.

This time, 3 options + 8-bit jog mode industrial wireless remote control non-standard customized model DH-Z3X4BZ (DC24V/100m/1 send and 1 receive/relay output), 3 selection positions correspond to 3 normally open relays on the receiver side Output, 8 inching action control (4 three-position self-resetting levers or 8 buttons are acceptable), corresponding to 8 inching mode normally open relay outputs, and 2 outputs corresponding to emergency stop, the total corresponds to The 13 relay output is the 13 switch signal control;

Product Features

1. The transmitter is sealed with silicone rubber ring, which is good waterproof.

2. Heartbeat packet detection:Once the transmitter is damaged or the signal is lost, the receiver will stop automatically.

3. The antenna is built inside to prevent it from being broken.

4. Each set remote control has unique ID identification code, even if the same frequency also does not interfere with each other.

Default configuration

1. Transmitter * 1 piece

2. Receivers * 1 piece

3. The receiver comes with 1m cable connector

4. Operation and Maintenance Manual

Attentions

1. Due to transportation requirements, the product is not equipped with battery.

2. When you order, please remark the voltage, DC12V/24V or AC220V/380V(AC by external transformer).

Warranty & Service

1. Customized logo and trademark are warmly-welcomed.
2. Good after-sale services offered.
3. 1 year warranty period, spare parts supply for free.
4. 100% QC inspection before shipment.

Packing & Delivery